Canon imagePROGRAF PRO-6600 Online Manual page 387

Setting items when you use WSD (one of the network protocols supported in Windows).
▪ ▪ Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows.
▪ ▪ Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
▪ ▪ Timeout settings
Specifies the timeout length.
◦ ◦ Bonjour settings
Setting items for LAN using Bonjour.
▪ ▪ Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
▪ ▪ Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
The factory default setting is "Canon XX-NNN" where XX-NNN is the model name of your
printer.
Note
• You cannot use the same service name as that already used for other LAN connected
devices.
◦ ◦ SNTP settings
Performs various settings for SNTP (Simple Network Time Protocol).
◦ ◦ Spanning tree settings
Enables/Disables spanning tree. Selecting Enable avoids circulating data on a network.
◦ LPR protocol settings ◦
Enables/Disables the LPR setting.
◦ RAW protocol ◦
Enables/Disables RAW printing.
◦ ◦ LLMNR
Specifies ON/OFF of LLMNR (Link-Local Multicast Name Resolution). Selecting ON allows the
printer to detect printer's IP address from the printer name without a DNS server.
◦ Gigabit Ethernet settings ◦
Specifies the communication speed and communication method when using Gigabit Ethernet.
◦ ◦ Use Dedicated Port
Selects whether to use a dedicated port for a command sent from a Canon application to the printer.
387