Canon imagePROGRAF PRO-6600 Online Manual page 72

• • When Roll paper auto feed is Enable and if you attach the roll holder without the roll paper
loaded on the roll holder, Preparing to feed the paper... appears on the operation panel. In this
case, press the Stop button on the operation panel to cancel feeding.
Note
• • For the procedure for attaching the roll paper to the Roll Holder, see
Holder."
• When selecting Enable in Roll paper auto feed. •
Go to step 6.
• When selecting Disable in Roll paper auto feed. •
Pull out roll paper evenly, insert leading edge between roll paper and arrows (A) directly beneath
it, and feed roll paper until you hear a sound.
Important
• If the roll paper has become unwound, remove the slack before loading the roll paper. •
• When feeding the leading edge of the roll paper, make sure the entire width of the roll paper •
is separating and feeding from the roll. If the roll paper is fed with some of the roll paper still
stuck to the roll, the roll paper will be damaged.
• • Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may
affect the printing quality. We recommend wearing clean cloth gloves when handling rolls to
protect the printing surface.
72
"Loading Rolls on the Roll