Table of Contents
Advertisement
Reinstalling the Printer
The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Installation Guide.
Caution
•
• Moving the printer requires at least six people, holding it on both sides. Be careful to avoid back strain
and other injuries.
•
• When carrying the printer, hold it securely by the carrying grips (A) on the bottom left, right, and rear.
The printer may be unsteady if you hold it at other positions, which poses a risk of injury from dropping
the printer.
1. Remove tape and packaging material attached to the printer.
1.
2.
2. Open the top cover and remove the belt stopper.
3.
3. Referring to the Printer Stand Setup Guide, assemble the Stand.
Caution
•
• The Stand must be assembled by at least two people on a flat surface. Attempting assembly by
yourself poses a risk of injury or bending the Stand.
•
• When assembling the Stand, lock the casters. In addition, always unlock the casters before
moving the assembled Stand. Attempting to move the stand when the casters are locked poses
a risk of injury or damage to the location site.
575
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the imagePROGRAF PRO-6600 and is the answer not in the manual?
Questions and answers