Canon imagePROGRAF PRO-6600 Online Manual page 125

7. 7. Selecting the printing method for the roll paper
When performing enlarged/reduced printing of the source document in accordance with the roll paper
width, select On (Bordered) or On (Borderless) from Fit Roll Paper Width.
8. 8. Set the other items
To rotate the document 90 degrees and print it, select the Rotate Page 90 degrees check box.
Note
• If you rotate a portrait document 90 degrees and print it at that horizontally, you may be able to
save paper depending on the paper size.
Important
• When you select the Rotate Page 90 degrees check box, an error will occur when attempting to
print if the vertical length of the document does not fit in the width set in Roll Paper Width.
Therefore to use this function, correctly set Roll Paper Width to the width of one of the roll papers
loaded in the printer.
Document
• If the roll papers loaded in the upper and lower levels are different media types, the document is
printed on the roll paper that matches the media type specified in the print job.
If the document is being rotated 90 degrees for printing and the roll papers loaded in the upper
and lower levels have different widths and different media types, set the correct combination of
width and media type so that they match one of the roll papers loaded in the printer.
Roll Width:
ISO A1/A2 Roll (594.0 mm)
125