Canon imagePROGRAF PRO-6600 Online Manual page 325

Auto
If the leading edge of the paper is cut crooked and is not cut straight when loading roll paper, cut the
leading edge straight and eject the fragment of paper to prevent printing on the platen and soiling
the printer.
Off
The edge is not cut and scraps are not removed.
On(Preset Length)
The paper is cut at the pre-defined length when the roll paper is loaded. The pre-defined length
depends on the type of paper. For more information, see "Paper Information List."
Paper Information List
On(Input Length)
The paper is cut at the specified length when the roll paper is loaded. The range of lengths that can
be specified depends on the type of paper.
Manual
The amount to cut from the leading edge of paper can be adjusted by using the operation panel.
To cut the paper after adjusting, select Cut paper and select Yes.
After cutting the paper, select Complete paper loading.
Note
• • If you do not select Complete paper loading after cutting the paper, you cannot print the next
job.
325