Reducing Dust from Cutting Rolls
If the paper tends to generate dust when cut, such as with Backlit Film, you can reduce flying dust by setting
Cut-dust reduction to ON from the operation panel menu, which will coat the leading and trailing edges
of the printed document with ink. As a result, you can reduce problems with the print head. You can set
Cut-dust reduction according to the media type.
A: The ink is coated.
B: Cut Position
Important
•
• Do not set Cut-dust reduction to ON for paper that wrinkles easily, such as Plain Paper or lightweight
paper. If not cut properly, the paper may jam.
1.
1. Select
(Setup) on the HOME screen.
2.
2. Select
Printer settings.
3. Select Paper-related settings.
3.
4. Select Advanced paper settings.
4.
5. Select the paper type for which you want to change the setting.
5.
6.
6. Select Cut-dust reduction.
220