Reducing Dust From Cutting Rolls - Canon GP-300 Online Manual

Reducing Dust from Cutting Rolls

If the paper tends to generate dust when cut, such as with Backlit Film, you can reduce flying dust by setting
Cut-dust reduction to ON from the operation panel menu, which will coat the leading and trailing edges
of the printed document with ink. As a result, you can reduce problems with the print head. You can set
Cut-dust reduction according to the media type.
Important
• • Do not set Cut-dust reduction to ON for paper that wrinkles easily, such as Plain Paper or lightweight
paper. If not cut properly, the paper may jam.
• • Borderless printing is not available when Cut-dust reduction is set to ON. When performing borderless
printing, set Cut-dust reduction to OFF.
Follow these steps to set Cut-dust reduction to ON.
1. 1. Tap paper settings display area on Home screen of operation panel.
Note
• If the Home screen does not appear, press the HOME button. •
2. 2. Tap Paper settings.
3. Tap Advanced. 3.
4. Tap Cut-dust reduction. 4.
116