Page Processing - Canon imagePROGRAF PRO-6600 Online Manual

Page Processing

You can configure advanced settings, such as for printing on roll paper and for adjusting how much of the
document extends outside the paper when printing borderless.
Roll Paper Width
Select the roll paper width.
Select the width that matches the width of the roll paper loaded in the printer.
Width
This enables you to select Custom Size in Roll Paper Width, allowing you to specify the roll width.
Three-sided Borderless
If you check this check box, and the width or the length of the output paper size is smaller than the roll
width, a margin will be created on the right of the document, and the remaining three sides (top, bottom,
and left) will be borderless when printing.
Banner Printing
Select this check box to print documents with several pages as one continuous document. When you
do this, the spaces between the pages will be removed.
Fit Roll Paper Width
The printer automatically expands or reduces the document to match the roll paper width and then
prints the document.
Off
The document is printed as-is without being expanded or reduced.
On (Bordered)
The printer automatically expands or reduces the document to match the roll paper width and then
prints the document.
On (Borderless)
When borderless printing is performed, the printer automatically enlarges or reduces the document
to match the roll paper width and then prints the document.
No Spaces at Top or Bottom
When printing on roll paper, you can save paper by reducing the upper and lower margins.
Rotate Page 90 degrees
When you print a portrait document onto roll paper, you can save paper by rotating the document 90
degrees and print the document horizontally relative to the paper.
258