Canon imagePROGRAF PRO-6600 Online Manual page 73

• • If the paper is wrinkled or warped, straighten it out before loading it.
• Load the roll so that there is no gap between the right edge of the paper and the Roll Holder. •
• Depending on the paper, the roll paper may be scratched when being fed and not feed well. •
In this case, you must feed the paper manually after setting Paper retention settings to
Release on the touch screen. Lift the release lever, advance the roll paper until its leading
edge appears on platen, lower the release lever, and then proceed to the next step. However,
if Paper retention settings is set to Release, automatic switching of the upper and lower
rolls is not possible.
3. Lower output guide. 3.
4. Close top cover. 4.
• When selecting Enable in Roll paper auto feed. •
The roll paper is fed.
• When selecting Disable in Roll paper auto feed. •
Select Start feeding, and then the roll paper is fed.
73