Settings On Print Server - Canon imagePROGRAF PRO-6600 Online Manual

Settings on Print Server

When you use the printer on a network, set up the printer driver for sharing on the print server system.
The procedure for setting up the print server systems is as follows:
1. 1. Install the printer driver
2. 2. Check that the printer to be used has been added
Open System Settings, and select Printers & Scanners.
The printer list displays the printers that are connected to the computer.
3. 3. Set sharing
Turn on Share this printer on the network.
Note
• Depending on the environment you are using, a message prompting you to restart the computer may be
displayed. To complete the installation properly, restart the computer.
The setup on the print server system is complete. Next, set up the client systems.
on the print server system
478