Canon imagePROGRAF PRO-6600 Online Manual page 476

The number of con-
nected clients reaches
the upper limit.
The signal to noise ra-
tio (S/N ratio) is low.
A link local address is
assigned.
The specified network The network name (SSID) is not specified.
name (SSID) is left de-
Enter the network name (SSID) specified for the destination.
fault value.
• • Wireless Direct does not allow more than 5 devices to be connected.
If you add a device to connect, disconnect a device you do not use before adding the
device.
• • There is a lot of noise from other devices.
Move the printer apart from other devices.
• Perform printer setup again.
• • The security key specified for the wireless router may not match that you entered.
The security key is case-sensitive.
Enter the correct security key.
476