Canon imagePROGRAF PRO-6600 Online Manual page 718

1025
Cause
Roll paper in Roll 2 is empty.
What to Do
Follow the steps below to replace the used roll with a new roll of the same type and size.
1. 1. Lift up the release lever and remove the roll paper.
Removing Roll Paper from the Roll Unit
2. 2. Load the new roll.
Loading Roll Paper in the Roll Unit
3. 3. If "There is a job which has not been printed yet. Do you want to print this job?" appears on the
touch screen, tap Yes.
Printing will resume, starting from the page on which the error occurred.
Note
• To stop printing, tap Stop.
718