ACRONYMS AND LEGEND
Acronyms
IAT
BPHE
CHWS
DHW
EHS
EWT
FCU
LWT
NHC
OAT
PMV
SHC
TR
UFC
UFH
WUI
Control Configuration Legend
Steps
Different steps to be done
Name of the table to be
to configure the unit
used in Customer Com. Bus
Possible to configure by direct access on WUI. Refer to WUI end user Manual.
Check to be done
Advanced Configuration Level (for basic operation no need to modify the setting)
4
Number of
Description of different value
parameter
which can take the parameter
Table
Par.
Designation
Name of parameter to be
used in Customer Com. Bus
Indoor Air Temperature
Brazed Plate Heat Exchanger
Chiller Water System
Domestic Hot Water
Electric Heater Stage
Entering Water Temperature
Fan Coil Unit
Leaving Water Temperature
New Hydraulic Control (refer to wiring diagram 'Main control card')
Outdoor Air Temperature
Pulse Modulating Valve
Space Heating / Cooling Control
Refrigerant Temperature
Underfloor Cooling
Underfloor Heating
Wall-mounted User Interface
Description
Range
Range of
parameter
Value by Default
Unit of
of parameter
parameter
Default
Ex.
Unit
Value given in example and
adapted at the described case