Adding An Individual - Xerox Phaser 8560MFP User Manual

Adding an Individual

Set up and save individual names and fax numbers to easily access them when you want to
send a fax.
Using the Control Panel
To add an individual speed dial entry:
1. On the control panel, press the Speed Dial button.
2. Select , and then press the OK button. The
Individual
and numbers have been previously entered, they are displayed.
3. Select a blank number in the list displayed, and then press the OK button.
4. Using the alphanumeric keypad:
a. Enter a name in the
b.
Enter a fax phone number in the
5.
Select a fax transmission speed from the list displayed on the
then press the OK button.
6. Select one of the following options:
If you want to add more names and fax numbers, repeat Steps 2 through 5.
■
■ If you are finished adding individual names, press the Back button until you return to
the main Fax menu screen.
See also:
Sending a Fax from the System
Setting the Fax Destination
Phaser® 8510/8560MFP Multifunction Product
Adding Individual and Group Speed Dial Entries
screen, and then press the OK button.
Individual Name
Fax Number
on page 6-2
on page 6-14
6-6
screen appears. If names
Individual
screen, and then press the OK button.
Starting Rate screen, and