Moving And Repacking The System; Precautions For Moving The System; Moving The System Within The Office - Xerox Phaser 8560MFP User Manual

Moving and Repacking the System

This section includes:
■

Precautions for Moving the System

■

Moving the System Within the Office

Preparing the System for Shipment
■
Caution: Parts of the system are hot. To avoid personal injury or damage to the system, allow
the ink to solidify. Run the
cool the system quickly.
Precautions for Moving the System
To view precautions and guidelines for safely moving your system, see
page A-1 in this user guide.
Moving the System Within the Office
To move the system within the office:
1.
Close the system's door and covers.
2.
Press the power switch located under the interface cover on the side of the system.
3. Within 10 seconds after turning off the system, select
the control panel.
Note: If you receive a
panel, the system is not ready to be moved. If the printhead is not locked, the system can
be damaged during shipment.
Phaser® 8510/8560MFP Multifunction Product
on page 8-25
on page 8-25
on page 8-27
Shutdown for Moving System
Power Down Error-Head not Parked
8-25
Moving and Repacking the System
procedure on the control panel to
User Safety
8560-117
Shutdown for Moving System
message at the control
on
on