Adjusting Copying Options; Basic Settings - Xerox Phaser 8560MFP User Manual

Adjusting Copying Options

This section includes:
■

Basic Settings

on page 4-3
■ Image Adjustments on page 4-8
Image Placement Adjustments
■
■ Output Adjustments
■ Advanced Copying on page 4-18
Basic Settings
You can change the following basic settings:
Selecting a Tray to Use for Copies
■
■ Setting the Copy Default Tray
■ Selecting Color or Black and White Copies
■ Specifying 2-Sided Originals or Copies
■ Selecting the Quality of the Copies
■ Selecting the Document Type
Selecting a Tray to Use for Copies
In some cases, you may want to make copies on letterhead, colored paper, or transparencies.
After loading the special paper in a tray, select the tray to use for your copies.
To select the tray for copying special paper:
1. On the control panel, press the Copy button.
2. Select
Paper Supply
3. Select one of the following trays to use for the copies, and then press the OK button.
■ Tray 1
■ Tray 2
■ (if available on your system)
Tray 3
■ (if available on your system)
Tray 4
Note: For best results, specify the size and type of paper if using Tray 1. Specify the paper
type if using Tray 2, 3, or 4.
Phaser® 8510/8560MFP Multifunction Product
on page 4-13
on page 4-16
on page 4-3
on page 4-4
on page 4-4
on page 4-5
on page 4-6
on page 4-7
, and then press the OK button.
4-3
Adjusting Copying Options