Xerox Phaser 8560MFP User Manual page 103

Lightening or Darkening the Image
To lighten or darken an image when it is copied, press the Lighten/Darken button on the
control panel to select a lighten/darken option.
Adjusting the Contrast of the Image
To reduce or increase the contrast of the image when it is copied:
1. On the control panel, press the Copy button.
2. Select , and then press the OK button.
Contrast
3. Select a whole number from
Note: The factory default is 0.
Automatically Suppressing Background Variations
When you are using originals printed on thin paper, text or images printed on one side of the
paper can sometimes be seen on the other side of the paper. To prevent this from happening in
your copy document, use the
scanner to variations in light background colors.
To change this setting:
1. On the control panel, press the Copy button.
2. Select
Auto Suppression
3. Select either or
On Off
Note:
The factory default is Off.
Adjusting Scan Sensitivity to Laser Originals
The option enables you to turn on/off optimizing scan sensitivity to originals
Laser Originals
printed on laser systems and printers.
To select an optimization option:
1. On the control panel, press the Copy button.
2. Select
Laser Originals
3.
Select or , and then press the OK button.
On Off
Note:
The factory default is Off.
Phaser® 8510/8560MFP Multifunction Product
to
Highest (+3) Lowest (-3)
setting to minimize the sensitivity of the
Auto Suppression
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
4-10
Adjusting Copying Options
, and then press the OK button.