6.
On the control panel, press the OK button if the correct paper size and type are displayed
as the current setup, or select the appropriate paper size and type:
a.
Select
Change setup
b.
Select
New Custom Size
c.
Select one of the following options for selecting the short edge size:
■
If the size displayed is correct, press the OK button.
■
If the size displayed is not correct, select
Up Arrow or Down Arrow button to select the correct size, and then press the
OK button.
d.
Select one of the following options for selecting the long edge size:
■
If the size displayed is correct, press the OK button.
If the size displayed is not correct, select
■
Up Arrow or Down Arrow button to select the correct size, and then press the
OK button.
7.
Select the appropriate paper type, and then press the OK button.
8.
In the printer driver, select Tray 1 as the paper source.
Phaser® 8510/8560MFP Multifunction Product
, and then press the OK button.
, and then press the OK button.
Change
Change
3-55
Printing on Specialty Media
, press the OK button, press the
, press the OK button, press the