Windows 98 Se Or Later And Windows 2000 Or Later; Macintosh Os 9.X - Xerox Phaser 8560MFP User Manual
Xerox phaser 8560mfp: user guide
Hide thumbs
Also See for Phaser 8560MFP:
- Service documentation (296 pages) ,
- Administrator's manual (98 pages) ,
- Evaluator manual (20 pages)
Table of Contents
Advertisement
Windows 98 SE or Later and Windows 2000 or Later
To install the printer driver from the Software and Documentation CD-ROM:
1.
Insert the CD-ROM into the computer's CD-ROM drive. If the installer does not launch,
do the following:
a.
Click Start, and then click Run.
b.
In the Run window, type: <CD drive>:\INSTALL.EXE.
2.
Select your desired language from the list.
3.
Select Install Printer Driver.
4.
Select the installation method you want to use, and then follow the onscreen instructions.
See also:
Advanced Features Guide at
Knowledge Base at
www.xerox.com/office/8510_8560support
Macintosh OS 9.x
USB
A USB-connected system does not display in the Chooser. To create a desktop USB system:
1.
Insert the Software and Documentation CD-ROM into the CD-ROM drive.
2.
Use the Desktop Printer Utility to create a desktop USB system. The utility is located in
the PhaserTools folder that is created during the software installation.
See also:
Advanced Features Guide at
Knowledge Base at
www.xerox.com/office/8510_8560support
Phaser® 8510/8560MFP Multifunction Product
www.xerox.com/office/8510_8560support
www.xerox.com/office/8510_8560support
2-11
Installing the System Drivers
Advertisement
Chapters
Table of Contents
