Setting The Fax Resolution; Selecting The Original Size; Selecting Auto Suppression - Xerox Phaser 8560MFP User Manual

Setting the Fax Resolution

To set the fax resolution:
1.
On the control panel, press the Fax button.
2.
Select , and then press the OK button.
Resolution
3.
Select an option from the list displayed, and then press the OK button.
Note: The factory default is Fine.

Selecting the Original Size

To select the size of the original for the fax:
1. On the control panel, press the Fax button.
2. Select
Original Size
3. Select one of the following options, and then press the OK button:
■
Automatic
■ Document Glass: Each original is prescanned to determine the size for each page.
Document Feeder: Each original is scanned at 8.5 inches wide by the length of
■
paper that feeds through the document feeder to determine the size for each page.
■ : Select a specific paper size from the list displayed.
<paper sizes>
Note: The factory default is Automatic.

Selecting Auto Suppression

When you are using originals printed on thin paper, images printed on one side of the paper
can sometimes be seen on the other side of the paper.
To prevent this from happening in your fax document, select the
the control panel:
1. On the control panel, press the Fax button.
2. Select
Auto Suppression
3. Select , and then press the OK button.
On
Note:
The factory default is Off.
Phaser® 8510/8560MFP Multifunction Product
, and then press the OK button.
, and then press the OK button.
6-15
Selecting Fax Options
Auto Suppression setting on