Solving Fax Problems; Configuring The Modem; Printing The Protocol Monitoring Report - Xerox Phaser 8560MFP User Manual

Solving Fax Problems

This section includes:
■

Configuring the Modem

■

Printing the Protocol Monitoring Report

Resetting Fax Options to the Factory Default
■
Configuring the Modem
To adjust modem settings:
1.
On the control panel, press the System button.
2.
Select
Troubleshooting
3.
Select
Fax Problems
4.
Select
Modem Configuration
5.
Select one or more of the following options, and then press the OK button:
■ : Sets the duration of each pause entered in a fax number when sending a
Dial Pause
fax.
■ Sets the delay between hearing the dial tone and the sound of the fax
Dial Delay:
number being dialed.
■
Max Compression
outgoing faxes.
Printing the Protocol Monitoring Report
The Protocol Monitoring Report provides information about the previous fax job as an aid in
determining fax protocol problems.
To print the report:
1. On the control panel, press the System button.
2. Select
Troubleshooting
3. Select
Fax Problems
4. Select
Protocol Monitor Report
Phaser® 8510/8560MFP Multifunction Product
on page 6-25
on page 6-25
on page 6-26
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
: Sets the highest compression method used for both incoming and
, and then press the OK button.
, and then press the OK button.
, and then press the OK button to print the report.
6-25
Solving Fax Problems