Changing Default Settings
Select one of the following methods to change the default settings for the system's fax
function.
Using the Control Panel
To change default settings:
1.
On the control panel, press the System button.
2.
Select
Job Defaults Setup
3.
Select
Fax Defaults Setup
4.
Select one of the following options, and then press the OK button:
■
Fax Send Setup
menu, and then press the OK button.
■
Fax Receive Setup
Setup menu, and then press the OK button.
■
Fax Configuration
Configuration menu, and then press the OK button.
Using CentreWare IS
To change default settings:
1.
Launch your web browser.
2.
Enter your system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Select the Properties tab, click to expand the Fax Settings folder, and then click Defaults.
4.
If desired, change the settings in these options for your fax job:
■
Fax Configuration
■
Fax Send Setup
■
Fax Receive Setup
5.
When you are finished making changes, click the Save Changes button.
Phaser® 8510/8560MFP Multifunction Product
, and then press the OK button.
, and then press the OK button.
: View or change settings for each item listed in the Fax Send Setup
: View or change settings for each item listed in the Fax Receive
: View or change settings for each item listed in the Fax
6-24
Managing Fax Functions