Xerox Phaser 8560MFP User Manual page 108

Shifting the Image
In some cases, you may want to change the placement of the image on the copy page.
To change image placement:
1. On the control panel, press the Copy button.
2. In the menu, select
Margin Shift
3. To increase the margin on the long edge of the copy:
a. Select
Long Edge
b. Select a number from
mm (in 1 mm increments), and then press the OK button.
50
4. To increase the margin on the short edge of the copy:
a. Select
Short Edge
b. Select a number from
mm (in 1 mm increments), and then press the OK button.
50
When you select margin shift options, a page icon with arrows indicating the direction that the
image shifts appears on the right side of the control panel display.
Note:
The factory default is Off (long edge margin of 0 and short edge margin of 0).
Phaser® 8510/8560MFP Multifunction Product
, and then press the OK button.
, and then press the OK button.
through inches (in 0.1 inch increments) or from
0 2.0
, and then press the OK button.
through inches (in 0.1 inch increments) or from
0 2.0
4-15
Adjusting Copying Options
through
0
through
0