Editing Or Deleting An Individual Speed Dial Entry - Xerox Phaser 8560MFP User Manual

Using CentreWare IS
To add a group speed dial entry:
1. Launch your web browser.
2. Enter your system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3. Select the Properties tab, and then click Group Directory in the Fax Settings folder.
4. Click the Add button and then enter the appropriate information in the following fields:
■ Group No.: Select a number from the drop-down field. This determines where the
group appears in the list.
Group Name: Enter the group's name.
■
5. Click the Next button.
6. Select members to add to the group from the Select New Members list. To select a
member, click in the box next to the member's name to insert a check mark.
7. When you are finished adding members to the group, click the Add to Group button.

Editing or Deleting an Individual Speed Dial Entry

To revise or remove individual names and fax numbers:
1. On the control panel, press the Speed Dial button.
2. Select , and then press the OK button.
Individual
3. Select a name from the list displayed on the
OK button.
4. Select one of the following options, and then press the OK button:
■
Use As Destination
name and fax number is displayed in the
■ : Edits the existing values for this individual. You can change the
Make Changes
individual's name, fax number, or starting rate.
■ Remove It : Removes the individual from the speed dial directory.
5.
To revise or remove the individual name and fax number information, follow the onscreen
prompts.
Phaser® 8510/8560MFP Multifunction Product
Adding Individual and Group Speed Dial Entries
Individual
: Returns you to the main fax screen. The selected individual's
Fax To
6-10
screen, and then press the
field.