Printing Glossy Paper - Xerox Phaser 8560MFP User Manual

Printing Glossy Paper

Glossy paper can be printed, 1- or 2-sided, from any tray.
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/supplies.
Guidelines
■ Do not open sealed packages of glossy paper until you are ready to load them into the
system.
■ Leave glossy paper in the original wrapper, and leave the packages in the shipping carton
until ready to use.
■ Remove all other paper from the tray before loading glossy paper.
■ Load only the amount of glossy paper you are planning to use. Do not leave glossy paper
in the tray when you are finished printing. Reinsert unused glossy paper in the original
wrapper and seal.
■ Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy
paper to curl and jam the system.
Printing Glossy Paper from Tray 1
To print glossy paper:
1.
Pull down and out on the handle to open Tray 1.
Phaser® 8510/8560MFP Multifunction Product
Printing on Specialty Media
8560-011
3-47