To load paper, envelopes, or other media in Tray 2, 3, or 4:
1.
Remove the tray from the system.
2.
Insert paper, transparencies, envelopes, or specialty media into the tray.
■
Single-sided printing: Insert the side to be printed faceup with the top of the page
toward the front of the tray.
Note:
When using pre-punched paper, adjust the print margins to accommodate the holes.
Printing over the holes may cause ink to transfer onto subsequent pages. A minimum
margin of 19 mm (0.75 in.) is recommended.
Phaser® 8510/8560MFP Multifunction Product
8560-020
8560-111
3-15
Loading Paper