Xerox Phaser 8560MFP User Manual page 159

Removing an Entry from a Group
To remove an entry:
1. On the control panel, press the Speed Dial button.
2. Select , and then press the OK button.
Group
3.
Select the group you want to change from the list displayed, and then press the OK button.
4. To remove an individual from this group:
a.
Select Remove Individual
there are one or more individuals in this group.
b.
Select an individual from the list displayed, and then press the OK button.
c.
Repeat the above steps to continue removing individuals from the group.
5. To remove a group from this group:
a. Select
Remove Group
are one or more groups in this group.
b.
Select a group from the list displayed, and then press the OK button
c. Repeat the above steps to continue removing groups from the group.
6. When you have finished removing individuals and other groups, select
press the OK button.
See also:
Sending a Fax from the System
Setting the Fax Destination
Phaser® 8510/8560MFP Multifunction Product
Adding Individual and Group Speed Dial Entries
, and then press the OK button. This option appears when
, and then press the OK button. This option appears when there
on page 6-2
on page 6-14
6-9
, and then
Done