Xerox Phaser 8560MFP User Manual page 78

4. Insert the tray into the tray slot, and then push it completely into the system.
5. On the control panel, press the System button.
a. Select
Paper Tray Setup
b.
Select Tray 2 Paper
c.
Select
Use current setup
change the paper type:
■ Select
Tray 2 Paper Type
press the OK button.
■ Select
Envelope
6. In the printer driver, select either Envelope as the paper type or the appropriate tray as the
paper source.
Phaser® 8510/8560MFP Multifunction Product
, and then press the OK button.
, Tray 3 Paper , or Tray 4 Paper
if is displayed as the current paper type, or
Envelope
,
Tray 3 Paper Type
from the list displayed, and then press the OK button.
3-40
Printing on Specialty Media
8560-119
, and then press the OK button.
, or , and then
Tray 4 Paper Type