Basic Scanning
This section includes:
■
Scanning Originals at the Phaser 8510MFP Product
■
Scanning Originals at the Phaser 8560MFP Product
Using Walk-Up Scanning
■
Note:
For additional scanning information, print the Scanning Guide. On the control panel,
press the Scan button, select
guide.
Follow the steps below for your Phaser 8510/8560MFP product to scan images at the control
panel. To clear the settings from the previous job, press the Clear All button.
Document Feeder
Insert originals faceup with the top of the page
entering the feeder first. Adjust the paper
guides so they fit against the originals.
Phaser® 8510/8560MFP Multifunction Product
on page 5-7
, and then press the OK button to print the
Scanning Guide
8560-045
Document Glass
Lift the document feeder or the document glass
cover, and then place the original facedown on
the back, left corner of the document glass.
5-3
Basic Scanning
on page 5-4
on page 5-5
8560-044