Managing Scan Templates
This section includes:
■
Creating a Template with an Image View Setting
■
Creating a Template to Scan Images Directly to a Folder
Deleting Templates
on page 5-25
■
You can create scan templates that contain specific settings, such as file type, resolution, and
original size. You can choose to retain thumbnail images in the Xerox Scan Utility, or you can
select a folder destination, so that when images are scanned, they are automatically copied into
a designated folder.
Note:
If you do not create a template, the system generates default file names for scanned
images using the date and time the image was scanned and the application extension. The
filename format is yyyy-mm-dd_hh.mm.ss.xxx.
To set or change the system's date and time, use the control panel or CentreWare IS.
See also:
Advanced Features Guide at
about changing system settings
Phaser® 8510/8560MFP Multifunction Product
on page 5-23
www.xerox.com/office/8510_8560support
5-22
Managing Scan Templates
on page 5-24
for information