Setting Up The Network; Choosing A Connection Method; Connecting Via Usb; Connecting Via Ethernet (Recommended) - Xerox Phaser 8560MFP User Manual

Setting Up the Network

This section includes:
■

Choosing a Connection Method

■

Connecting via USB

Connecting via Ethernet (Recommended)

■
Choosing a Connection Method
Connect the system via Ethernet or USB. A USB connection is a direct connection and not
used for networking. An Ethernet connection is used for networking. Hardware and cabling
requirements vary for the different connection methods. Cabling and hardware are generally
not included with your system and must be purchased separately.
Connecting via USB
If you are connecting to one computer, a USB connection offers fast data speeds. However, a
USB connection is not as fast as an Ethernet connection. To use USB, PC users must have
Microsoft Windows 98 SE, Windows 2000, or Windows XP. Macintosh users must use
Mac OS 9.x and higher.
USB Connection
A USB connection requires a standard A/B USB cable. This cable is not included with your
system and must be purchased separately. Verify that you are using the correct USB cable for
your connection.
1. Connect one end of the USB cable to the system and turn it on.
2. Connect the other end of the USB cable to the computer.
See also:
Installing the System Drivers
Connecting via Ethernet (Recommended)
Ethernet can be used for one or more computers. It supports many printers and systems on an
Ethernet network. An Ethernet connection is recommended because it is faster than a USB
connection. It also allows you direct access to CentreWare Internet Services (IS).
CentreWare IS provides a simple interface that enables you to manage, configure, and monitor
networked printers from your desktop using an embedded web server. For complete
information about CentreWare IS, click the Help button in CentreWare IS to go to the
CentreWare IS Online Help.
Phaser® 8510/8560MFP Multifunction Product
on page 2-3
on page 2-3
on page 2-3
on page 2-10
2-3
Setting Up the Network