Selecting The Starting Rate; Delay Sending A Fax; On The Control Panel, Press The Fax Button - Xerox Phaser 8560MFP User Manual

Selecting the Starting Rate

Select the highest starting rate unless the fax destination for the fax you are sending has special
requirements.
To select the transmission speed for a fax:
1.

On the control panel, press the Fax button.

2. Select
Starting Rate
3. Select an option from the list displayed, and then press the OK button.
Note:
The factory default is 33.6 kbps (Super G3) for Phaser 8560MFP products and
14.4 kbps for Phaser 8510MFP products.

Delay Sending a Fax

To send a fax at a specified time (within 24 hours):
1. On the control panel, press the Delayed Send button.
2. Select , and then press the OK button.
Send later
3.
Select the time to send the fax:
■ : Select a number from
Hour to send
■ : Select a number from
Minute to send
4. Select one of the following options on the
■ Select to accept the delayed send time.
OK
Select to change the delayed send time. Follow the prompts to revise the
■ Change
delayed send time.
5. If desired, select other control panel options, and then press the Start button. The fax is
scanned and saved to be sent at the time you specified.
Phaser® 8510/8560MFP Multifunction Product
, and then press the OK button.
to
0
0
Time to send
6-16
Selecting Fax Options
, and the press the OK button.
23
to , and then press the OK button.
59
screen: