Xerox Phaser 8560MFP User Manual page 69

3. Insert transparencies into the tray.
Note:
Do not load transparencies above the transparency fill line inside the tray.
4.
On the control panel, press the OK button if the correct paper size and
displayed as the current setup, or select the transparency size and type:
a.
Select
Change setup
b. Select the appropriate transparency size, and then press the OK button.
c. Select
Transparency
5. In the printer driver, select either Transparency as the paper type or Tray 1 as the paper
source.
Phaser® 8510/8560MFP Multifunction Product
, and then press the OK button.
, and then press the OK button.
3-31
Printing on Specialty Media
8560-028
Transparency
are