Regulations And Standards; Approvals; Table 17 Standards And Regulations - WAGO 765-1103/100-000 Manual

Properties
Also note the derating curve for the individual contacts (pins) of the A-coded connections
port X01, X02 etc. The following figure shows the maximum permissible current (I) that
can flow through the contact (pin) as a function of the ambient temperature (T).
Figure 5: Derating of a Contact (Pin) of the A-Coded Connections Port X01, X02, ... (for Core Cross-Section =
High currents may occur on connections ports X01, X02, ... on pin 3.

4.6 Regulations and Standards

The following regulations and standards were used in the development of the module:
Standard
EN 61000-6-2
EN 61000-6-4
EN 61131-2
IEC 61158

4.7 Approvals

The following approvals have been granted for the product:
22 Product manual | Version: 2.2.0
16DO FLD PN DC 24V 2.0A
Figure 4: Derating of a Contact (Pin) of L-Coded Connections X31 and X32 (For Core Cross-Section =
Conformity marking
UL
Table 17: Standards and Regulations
Title
Electromagnetic compatibility (EMC) – Immunity for industrial en-
vironments
Electromagnetic compatibility (EMC) – Emission standard for in-
dustrial environments
Programmable logic controllers
PROFINET
UL 61010-1 and UL 61010-2-201, "Ordinary
Location"
765-1103/100-000
2
0.25 mm /AWG 14)
2
0.34 mm /AWG 22)
Pending