Table of Contents
Advertisement
11/ UEFI BIOS
11.1. Starting the UEFI BIOS
The COMe-bID7 uses a Kontron-customized, pre-installed and configured version AMI EFI BIOS Aptio ® V based on the
Unified Extensible Firmware Interface (UEFI) specification and the Intel® Platform Innovation Framework for EFI. This
UEFI BIOS provides a variety of new and enhanced functions specifically tailored to the hardware features of the
COMe-bDV7.
The BIOS version covered in this document might not be the latest version. The latest
version might have certain differences to the BIOS options and features described in this
chapter.
Register for the EMD Customer Section to access BIOS downloads and the Product Change
Notification (PCN) service at Kontron's Customer Section.
The UEFI BIOS comes with a Setup program that provides quick and easy access to the individual function settings for
control or modification of the UEFI BIOS configuration. The Setup program allows for access to various menus that
provide functions or access to sub-menus with further specific functions of their own.
To start the UEFI BIOS Setup program, follow the steps below:
1.
Power on the board.
Wait until the first characters appear on the screen (POST messages or splash screen).
Press the <DEL> key.
If the UEFI BIOS is password-protected, a request for password will appear. Enter either the User Password or the
Supervisor Password (see
www.kontron.com
COMe-bID7 User Guide Rev. 1.2
// 67
Advertisement
Table of Contents
