Commissioning; Basic Information; Connecting Cables - B&R PC 3100 User Manual

Commissioning

6 Commissioning

6.1 Basic information

Condensation may form under certain environmental conditions or rapid climatic changes. For im-
proved acclimatization and to avoid damage, the device must be slowly adapted to the room temper-
ature.

6.2 Connecting cables

When connecting or installing cables, the bend radius
specification must be observed. For this specification,
see the technical data of the respective cable.
The maximum tightening torque of the locating screws is
0.5 Nm.
218
1
2
1) Bend radius
2) Locating screws
Panel PC 3100 panel mount device User's manual V 2.10
2