Installation and wiring
5.1.5 Installation information for individual deliveries / individual components
Information:
If the PPC3100 is not delivered as a complete system but as individual deliveries (or individual com-
ponents are installed afterward), it may be necessary to enable these components in BIOS. To do this,
open BIOS during system startup, load the BIOS default values and restore and save any customized
BIOS settings. For additional information, see section
be required for the following individual components:
• System unit
• Interface option
• Graphics option
• Mass storage option
• Main memory (DDR4 SDRAM)
214
"UEFI BIOS options" on page
Panel PC 3100 panel mount device User's manual V 2.10
224. This may