Procedure In The Efi Shell - B&R PC 3100 User Manual

Software
7. After a successful upgrade, the system must be switched off and on again for the upgrade to take effect.
✓ The upgrade is installed and in effect.
The transfer can be canceled by clicking on Cancel in dialog box "Download". This is disabled while writing to
flash memory.
Erasing the data in flash memory can take several seconds depending on the memory module used. During this
time, the progress indicator is not updated.
Information:
For more detailed information about saving and updating the firmware, see the ADI driver user's man-
ual. This is available for download at www.br-automation.com.

7.2.3.2 Procedure in the EFI shell

1. Download the ZIP file from the B&R website (www.br-automation.com).
2. Unzip the ZIP file and copy the files to a USB flash drive formatted in FAT16 or FAT32. Alternatively, a CFast
card can also be used.
3. Reboot the PC, open the boot menu with [Esc], [Del] or [F2] and select Internal EFI shell as the boot device.
4. After booting the EFI shell, startup.nsh is executed and the SDLR and SDL4R upgrades are started in se-
quence.
5. After a successful upgrade, a the system must be switched off and on again.
✓ The upgrade is installed and in effect.
Information:
The power supply to the PC or Automation Panel must be switched off and on again for the new
firmware to take effect and the updated version to be displayed.
268 Panel PC 3100 panel mount device User's manual V 2.10