5Ac901.I485-00 - B&R PC 3100 User Manual

4.2.7.2 5AC901.I485-00

4.2.7.2.1 General information
Interface option 5AC901.I485-00 is equipped with an RS232/RS422/RS485 interface. The operating mode (RS232/
RS422/RS485) is selected automatically depending on the electrical connection.
• 1x RS232/RS422/RS485 interface
• Compatible with APC910/PPC900 and APC3100/PPC3100
Simultaneous operation of this interface option in slot IF option 1 with interface option 5ACCIF02.ISS0-000 in slot
IF option 2 is not possible.
4.2.7.2.2 Order data
Order number Short description
Interface options
5AC901.I485-00 Interface card - 1x RS232/RS422/RS485 interface - For
APC910/PPC900/APC3100/PPC3100
4.2.7.2.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Order number
General information
B&R ID code
Certifications
CE
UKCA
UL
HazLoc
DNV
LR
KR
ABS
BV
EAC
Interfaces
COM
Type
Variant
UART
Max. baud rate
Terminating resistor
Type
Default setting
Electrical properties
Power consumption
Operating conditions
Pollution degree per EN 61131-2
Panel PC 3100 panel mount device User's manual V 2.10
5AC901.I485-00
0xD84A
Yes
Yes
cULus E115267
Industrial control equipment
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: A (0.7 g)
EMC: B (bridge and open deck)
ENV3
Yes
Yes
EC31B
Temperature: 5 - 55°C
Vibration: 0.7 g
EMC: Bridge and open deck
Product family certification
RS232/RS422/RS485, galvanically isolated
DSUB, 9-pin, male
16550-compatible, 16-byte FIFO buffer
115 kbit/s
Can be switched on and off with slide switch
Off
1 W
Pollution degree 2
Technical data
Figure
1)
2)
149