Replacing Cfast Cards - B&R PC 3100 User Manual

8.3 Replacing CFast cards

Caution!
The CFast card is only permitted to be replaced in a voltage-free state.
Improper handling of the ejection lever (e.g. applying a large amount of force) can result in a defect
in the ejector mechanism.
1. Disconnect the power supply cable to the B&R industrial PC (disconnect the power cable).
2. Loosen the Torx screw (T10) of the cover plate and remove the cover plate.
3. Press the ejector next to the card slot. The CFast card is ejected and can be replaced.
4. After replacing, re-secure the cover of the CFast card slot. The max. tightening torque of the screw is 0.55 Nm.
Panel PC 3100 panel mount device User's manual V 2.10
Maintenance
303