5Accif02.Fpls-000 - B&R PC 3100 User Manual

Technical data

4.2.7.13 5ACCIF02.FPLS-000

4.2.7.13.1 General information
Interface option 5ACCIF02.FPLS-000 is equipped with a POWERLINK and RS232 interface. In addition, 2 MB
SRAM is installed.
• 1x POWERLINK interface managing or controlled node
• 1x RS232 interface
• 2 MB SRAM
• Compatible with APC3100, PPC3100
This interface option can only be operated in slot IF option 2 and additionally uses slot IF option 2 add-on.
4.2.7.13.2 Order data
Order number Short description
Interface options
5ACCIF02.FPLS-000 Interface card - 2 MB SRAM - 1x RS232 interface - 1x POWER-
LINK interface - For APC3100/PPC3100
Optional accessories
Terminal blocks
0TB1210.3100 Connector 300 VDC - 10-pin female - Cage clamp terminal block
- Protected against vibration by the screw flange
4.2.7.13.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Order number
General information
B&R ID code
Diagnostics
Data transfer
Certifications
CE
UKCA
UL
Controller
SRAM
Size
Battery-backed
Remanent variables in power failure mode
Interfaces
COM
Quantity
Type
Variant
UART
Max. baud rate
POWERLINK
Quantity
Type
Variant
Transfer rate
Transfer
Line length
Electrical properties
Power consumption
Operating conditions
Pollution degree per EN 61131-2
176
5ACCIF02.FPLS-000
0xF2E2
Yes, using LED "Status/Error"
Yes
Yes
cULus E115267
Industrial control equipment
2 MB
Yes
256 kB (for e.g. Automation Runtime, see Automation Help)
1
RS232, modem supported, not galvanically isolated
10-pin, male
16550-compatible, 16-byte FIFO buffer
115 kbit/s
1
Type 4
1)
RJ45, shielded
100 Mbit/s
100BASE-TX
Max. 100 m between two stations (segment length)
1.75 W
Pollution degree 2
Panel PC 3100 panel mount device User's manual V 2.10
Figure