Reset Disks To Non-Raid - B&R PC 3100 User Manual

7.3.1.5 Reset disks to non-RAID

An existing RAID volume can be deleted using option "Reset disks to non-RAID". The RAID to be deleted is selected
and then deleted by pressing <SPACE> (<ENTER> to confirm).
Information:
Deleting a RAID volume also deletes all of the data on the drive.
RAID Volumes:
ID Name Level
0 Mirror RAID1(Mirror)
WARNING: Resetting a disk causes all data on the disk to be lost.
Phhsical Devices:
ID Device Model Serial #
ID
0 WDC WD500LUCT-6 WD-WX21AB2X6150 465.7GB
0
2 WDC WD500LUCT-6 WD-WX21AB2X6150 465.7GB
2
[ ]-Select
­¯
Panel PC 3100 panel mount device User's manual V 2.10
Intel(R) Rapid Storage Technology - Option ROM - 15.7.0.3054
Copyright(C) Intel Corporation. All Rights Reserved.
1. Create RAID Volume
[ RESET RAID DATA
2. Delete RAID Volume 5.
3. Reset Disks to Non-RAID 6.
Resetting RAID disk will remove its RAID structures
[ DISK/VOLUME INFORMATION
and revert it to a non-RAID disk.
Strip Size Status Bootable
N/A 465.8GB
(This does not apply to Recovery volumes or Cache disks)
Size Type/Status(Vol ID)
Drive Model Serial #
SFCA064GH1AD4TO- 60143158A6000044
SFCA064GH1AD4TO- 60134158A6000058
Select the disks that should be reset.
[ ]-Previous/Next [SPACE]-Selects
­¯
[ESC]-Exit
Figure 15: Resetting the RAID volume
[ MAIN MENU ]
4. Recovery Volume Options
]
Acceleration Options
Exit
]
Normal
Size
Member Disk(0)
59.6GB
Member Disk(0)
59.6GB
[ENTER]-Selection Complete
[ENTER]-Select Menu
Yes
Status
Member Disk
Member Disk
Software
273