Automation Software; Licensing; Order Data; Support - B&R PC 3100 User Manual

Software

7.6 Automation software

7.6.1 Licensing

B&R Automation Runtime software components (e.g. Automation Runtime, B&R Hypervisor, mapp Technology)
require a license.
It is possible to choose between the following licensing types:
Technology Guarding (TG)
Technology Guarding is license protection used for individual software components. The Technology Guard (hard-
ware dongle) serves as the license container; this is connected to an available USB interface on the target system.
Information:
Licensing via TG is required for Automation Studio V4.1 or later and Automation Runtime V4.08 or
later. No TG is necessary in earlier versions.
Terms and conditions (TC)
No Technology Guard is necessary; licensing takes place via a license agreement. Licenses are supplied with the
sales receipt. The user is responsible for complying with the license conditions. B&R is protected by the terms
of the EULA.
Information:
Licensing via TC is possible for Automation Studio V4.9 or later as well as Automation Runtime V4.90
or later.
For detailed information about licensing, see Automation Help (Automation software / Licensing).

7.6.2 Order data

Hardware-based licensing (Technology Guard)
Order number Short description
Technology Guard
0TG1000.01 Technology Guard (MSD)
0TG1000.02 Technology Guard (HID)
0TGF016.01 Technology Guard (MSD) with integrated flash drive, 16 GB
(MLC)
1TG4601.06-5 Automation Runtime Embedded, TG license
1TG4601.06-T Automation Runtime Embedded Terminal TG license
1TG4600.10-5 Automation Runtime Windows TG license
1TG4700.00 B&R Hypervisor
Contract-based licensing (terms and conditions)
Order number Short description
Runtime
1TC4601.06-5 License for Automation Runtime Embedded (TC). One license
per target system is required.
Hypervisor
1TC4700.00 License for B&R Hypervisor (TC). One license per target system
is required.

7.6.3.1 Support

The following table provides an overview of which Automation Runtime software components are supported by
the device.
Target system
PPC3100 Yes
1) ARwin is no longer supported starting with Automation Runtime V4.6.
288
B&R Hypervisor
Yes
ARemb ARemb Terminal (TG only)
No
Panel PC 3100 panel mount device User's manual V 2.10
Figure
Figure
ARwin (TG only)
1)
Yes