Bios Setup And Startup Procedure; Input Options - B&R PC 3100 User Manual

Software

7.1.2 BIOS Setup and startup procedure

UEFI BIOS is enabled immediately after switching on the B&R industrial PC. A check takes place as to whether the
setup data from the FLASH block is OK. If it is OK, the boot procedure is started. If it is not OK, the setup default
settings are loaded and the boot procedure is continued.
UEFI BIOS reads the system configuration information, checks the system and configures it through the power-on
self-test (POST).
UEFI BIOS then searches the data storage media in the system (CFast cards, USB mass storage devices, SSD,
HDD, etc.) for an operating system. UEFI BIOS starts the operating system and transfers to it control over system
operations.
To enter UEFI BIOS Setup, [Esc], [Del] or [F2] must be pressed after initializing the USB controller when the
following message appears on the screen (during POST): Press ESC / DEL / F2 to enter Setup.
If a B&R panel with touch sensor is used during device configuration, Setup can be opened by quickly tapping the
upper edge of the touch area.

7.1.2.1 Input options

Power-on self-test (POST)
The following keys are enabled during POST:
Keys
Esc, Del, F2
<Pause>
Information:
The key signals of the USB keyboard are only processed after the USB controller in initialized.
Boot menu
The following keys are enabled during POST:
Key
F1
ESC
Cursor keys (←, ↑, ↓, →)
Enter
BIOS Setup
The following keys can be used after entering BIOS Setup:
Key
F1
ESC
Cursor keys (←, ↑, ↓, →)
Page ↑, Page ↓
F5
F6
226
Function
Accesses the BIOS Setup menu or boot manager.
The POST can be stopped with the <Pause> button. POST resumes after pressing any other key.
Function
Help
Exits the help documentation
Navigation in the boot menu
Opens the selected submenu
Function
Help
Exits
Navigation in the menu
Press once: Cursor jumps to first/last line in the display area
Press twice: Cursor jumps to first/last item in the menu
Changes a value (step back)
Changes a value (step forward)
Panel PC 3100 panel mount device User's manual V 2.10