Uninterruptible Power Supply (Ups); Requirements - B&R PC 3100 User Manual

Technical data

4.2.8 Uninterruptible power supply (UPS)

With the optionally integrated UPS, the B&R industrial PC ensures that the PC system can complete write oper-
ations even after a power failure occurs. If the UPS detects a power failure, it switches to battery operation im-
mediately without interruption. All running programs are properly exited by the UPS software. The possibility of
inconsistent data is eliminated (only works if the UPS has already been configured and the driver is enabled).
Information:
• An external panel or monitor is not buffered by the UPS and will fail if a power failure occurs.
Because the charging circuit is integrated in the housing of the B&R industrial PC, installation has been reduced
to simply attaching the connection cable to the battery unit installed next to the PC.
Special emphasis was placed on simplified maintenance when designing the battery unit. Batteries are easily
accessible from the front and can be replaced in just a few moments when servicing.

4.2.8.1 Requirements

• A suitable system unit
• UPS IF option 5AC901.IUPS-00 or 5AC901.IUPS-01
• Battery unit 5AC901.BUPS-00 or 5AC901.BUPS-01
• UPS connection cable 5CAUPS.00xx-01
• B&R UPS configured in the ADI Control Center
Warning!
Battery unit 5AC901.BUPS-00 is only permitted to be operated with UPS IF option 5AC901.IUPS-00!
Battery unit 5AC901.BUPS-01 is only permitted to be operated with UPS IF option 5AC901.IUPS-01!
Information:
For information about installation and connecting to the UPS IF option, see section
connecting the UPS battery unit" on page
188
309.
Panel PC 3100 panel mount device User's manual V 2.10
"Installing and