Power Connection; Connect The Dc Power Cable - Pepperl+Fuchs VisuNet FLX System Manual

VisuNet FLX System
Electrical Installation
5.3

Power Connection

Warning!
Hazard due to excessive current!
Excessive current can cause overloading of the electronics which could then result in injury or
damage.
Operate the device with a power supply that complies with SELV/PELV or NEC Class 2!
5.3.1

Connect the DC Power Cable

Danger!
De-energize the equipment or disconnect the supply of the device before removing any covers
or elements of the system, and prior to installing or removing any accessories, hardware, or
cables.
Always use a properly rated voltage sensing device to confirm that power is off.
Replace and secure all covers or elements of the system before applying power to the unit.
Failure to follow these instructions may result in death or serious injury.
Note
Cable glands represent limitation.
75