EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
4. Rotate the gear of the Inksystem Assy in the direction of the arrow to move
the wiper to wiping position.
Wiper
Inksystem Assy
Figure 8-2. Preparation of Cleaning the Wiper
Maintenance/inspection
Wiper
Gear
Cleaning
5. Clean the wiper and the cap part using the Polyester swab moistened with
pure water.
Cleaning the wiper
Clean the top end and right side of the Wiper by moving the Polyester swab
in the direction of the arrows as shown in the figure below.
Top
Right
Figure 8-3. Cleaning the Wiper
If the Polyester swab is moved in a direction other than
that indicated by the arrows in the figure above, the
Wiper may shift. Therefore, always be sure to move it in
the direction of the arrows.
Be very careful when cleaning the Wiper as it is made of
rubber and may be easily damaged.
Revision A
Wiper
Wiper
584
Confidential