Epson WF-C5790 Service Manual page 340

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
F12
Full side Side view
Hook
CR Unit
1. At the full side, remove the CR Scale from hook on the frame.
2. Pull the CR Scale out from the CR Encoder Sensor.
3. At the home side, turn the CR Scale 90 degrees upward, and remove it from the hook on the
frame.
Attach the CR Scale with the marking on the bottom right corner.
Disassembly/assembly
CR Scale
CR Encoder
Home side
Sensor
CR Scale
Hook
CR Scale
Marking
Disassembly/Reassembly Procedures
F13
PS Ground Plate
1. Remove the two screws (S4: , S5: ), then remove the PS Ground Plate.
Revision A
PS Ground Plate
No. Screw Type
S4 C.B.P-TITE-SCREW-3x10-F.ZN-3C
S5
C.B.S-TITE-SCREW-3x6-F.ZN-3C
Confidential
340