EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
CR ERROR (1)
Error name
CR PID driving time error (error code: 000020)
CR load position driving time error (error code: 000030)
Cause
The driving time of the motor exceeded the set time.
Suspected cause
CR Motor cable disconnection or contact failure
Main Board failure
Troubleshooting
Step
Visually check the CR Motor cable.
1
Check the CR Motor cable to make sure that there is no error (disconnection/
contact failure).
Replace the Main Board Assy.
2
Does the error occur after replacing the Main Board Assy?
Troubleshooting
Check and measure
Troubleshooting procedure
Yes
Go to step 2
Contact the EPSON Service Department.
Revision A
No
Correctly insert the motor cable.
Replace the CR Motor if the motor cable is
disconnected.
End
Confidential
101