Adjustment (Mechanical) - Epson WF-C5790 Service Manual

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a

7.3.2.2 Adjustment (Mechanical)

MOTOR HEAT PROTECTION CONTROL

Target adjustment

CR motor heat protection control

PF motor heat protection control

IS motor heat protection control

ASF motor heat protection control

Scanner/ADF motor heat protection control

Adjustment Procedure
1. Start the Adjustment Program, and select the target adjustment item.
2. Place a check mark for the replaced component, press the Perform button, and
then execute motor heat protection control.
Figure 7-13. Adjustment screen (E.g. PF motor heat protection control)
Adjustment
PE DETECTOR CONFIRMATION

Paper and feed tray

Paper size:

Paper type:

Paper feed tray: Paper Cassette 1st

Adjustment Procedure
1. Load paper into the Paper Cassette 1st.
2. Start the Adjustment Program, and select "PE Detector confirmation".
3. Press the Perform button to execute "PE Detector confirmation".
C H E C K
P O I N T
Adjustment and Inspection Details
A4
Plain paper
Figure 7-14. PE Detector confirmation screen
If the check results are NG, check the installation state of the PE
Lever and PE Sensor.
Revision A
567
Confidential